Saturday, September 30, 2017

PTU Flying High


This tut was written Sept 30, 2017, for those with a basic knowledge of psp.
I am using the awesome artwork of  Lys Isange
The tube is called "Witch-Zombie Halloween Fun Collab" at S&Co
She comes in 3 different colors.

You can get the tube for free if you spend $5.00
You need a license to use this art work. Please do not use without a license.
 You can get this tube exclusive at S&CO Store  HERE

Store Collab Packs :: HALLOWEEN FUN COLLAB 2017
Add this product to your cart and spend
just $13.50 to get it as a free gift.


Supplies Needed
I used PSPX...but any of them should work.
PTU kit SNC Halloween Free Collab_PU  by
A Lil Mz's Brainstorm exclusive at S&Co  HERE
Angie Tagged Me Mask 19 HERE
Check out the rest of the blog HERE

Font of Choice, I used Magic School One

Drop Shadow usually V2 H2 50 black
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 5, apply your mask, delete, merge group.

Resize your tube to 35%, paste toward the top more.

Paste element 2 on the mask layer.
Paste element 44 at the bottom under the tree.
Resize element 45 to 45%, paste behind the tree on the left at the bottom,
duplicate, mirror, adjust on the right behind the tree.

Resize element 24 to 75%, paste at the top left behind the tube.
Resize element 50 to 10%, paste at the bottom in front of the tree.
Resize element 49 to 55%, paste below the rock layers, duplicate three or
four times and arrange how you like, duplicate one and move above the rocks
on the left.
Resize element 29 to 30%, paste at the bottom on the left in front of
the corn stalk.

Paste element 48 below the tree layer at the bottom, duplicate, mirror,
erase the overlapping in the center.

Resize element 25 to 55%, mirror, paste on the right below the witch layer.
Resize element 28 to 35%, mirror, paste on the right below the rocks.
Resize element 16 to 25%, paste by the barrel at the bottom.
Paste element 42 at the top behind the tube.
Resize element 15 to 25%, mirror, paste at the upper right.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.


That's it
Hope you enjoyed doing my tut.



FTU Clusters Celebration


*CT for BLT Creates*

Cluster Names -: Celebration Clusters
Kit Designer Name -: BLT Creates
Kit name -: Celebration

New kit by BLT Creates - Celebration
Available in both Full and Tagger Size
You can find it at PFD:  HERE
It is also available exclusively for BLT Creates's fans for $1 ONLY -


Fanclub link:
https://www.facebook.com/groups/BLTDeZignZFanClub/

Unlimited specials are relaunching.

All Brandy's kits are available to the Fan members for $1.

Click on the Cluster to get full size, then right click and save.

Here are a couple of tags I made with them




PTU Clockwork Time


This tut was written Sept. 30th, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of Keith Garvey.
Tube is called Clock Work
You need a license to use this art work. Please do not use without a license.
 You can find this art at his store  HERE  

I used PSPX...but any of them should work.
PTU Scrap Gaslamp Fantasy by Irish Princess Designs  HERE
This kit is Amazing
This beautiful black and white Steampunk kit works
with all Steampunk and Victorian Tubes.
You can also find this kit at one of these stores HERE, HERE, HERE
Dragonfly Mask 0006  HERE
Check out the rest of the blog HERE
Filters
Murs Meister Copies-Encircle
xero-Bad Dream

Font of choice,  I used Steampunk

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Add a new layer, select all, paste paper 1 into selections, apply your mask
delete, merge group.

Resize element 85 to 85%, paste, click inside with your magic wand, expand by 5,
paste paper 5, move so only the color shows and none of the chains.

Resize your full tube to 95%, paste in the center below the frame, duplicate,
move above the frame, erase the parts showing outside of the frame on
both tubes.
Resize element 58 to 30%, paste at the bottom on the frame layer,
duplicate, resize to 85%, paste on top of the other one.
Resize element 8 to 45%, paste below the paper layer of the frame at the
lower left, duplicate, move up to the upper right.

Resize element 12 to 40%, apply Mura Meister Copies-Encircle, first
number on 12, move to the mask layer, adjust.

Resize element 20 to 25%, paste on the frame on the right center below the tube.
Resize element 46 to 25%, paste under the heart on the right, duplicate,
mirror, move under the arm of the tube half way.
Resize element 109 to 25%, paste on the oval label on the right, duplicate, mirror.

Resize element 21 to 30%, flip, paste on the post on the tag on one side,
duplicate, mirror.
Resize element 96 to 25%, paste at the bottom below the flower layer, duplicate, mirror.

Go back to the gear clocks that are above the flower circle that is on the mask layer,
select either one, float, defloat,
paste your tube, invert, delete, change the blend mode to Screen.
Do the same with the other gear clocks.
Then apply the xero filter-Bad Dream to both tubes.

Add any other elements that you would like, make it your own.

Once happy with your tag, close off any background, crop your tag to make
sure there are no stray edges, merge visible, resize first.
Add your copyrights and name.

That's it
Hope you enjoyed doing my tut.


Thursday, September 28, 2017

PTU It's Magical


This tut was written Sept 28th, 2017, for those with a basic knowledge of psp.
I am using the awesome artwork of  Lys Isange
The tube is called "Magic Lamp" exclusive at S&Co
She comes in 7 different colors.
You need a license to use this art work. Please do not use without a license.
 You can get this tube exclusive at S&CO Store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU kit Magic Candle by Lil Mz's Brainstorm exclusive at S&Co  HERE
Angie Tagged Me Mask 19 HERE
Check out the rest of the blog HERE
Animation 449 by Simone HERE
Check out the rest of the blog HERE
Filters
xero-Bad Dream

Font of Choice, I used Magic School One

Drop Shadow usually V2 H2 50 black
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 2, apply your mask, delete, merge group, duplicate,
merge down.

Paste element 13, take your free hand tool draw around completely,
paste paper 4, invert, delete, paste your close up, delete, select none.
Duplicate, go to Adjust, Blur, Gaussian blur, number on 4, change the blend
mode to Screen.
Apply the xero filter-Bad Dream

Resize tube to 45%, mirror, paste on the left.

Resize element 17 to 50%, paste at the bottom in front of the tube.
Resize element 5 to 50%, paste under the tube on the right, duplicate, mirror,
duplicate three more times, arrange under the tube how you like.

Resize element 37 to 65%, paste on the right at the bottom above the tube layer.
Resize element 59 to 75%, paste behind the tube and up on the left,
duplicate, move down on the left behind the tube, erase the bottom part
that is showing past the tube.

Paste element 29 on the mask layer on the right, duplicate, mirror.
Mirror, paste element 105 on the right on the frame, free rotate to the
right at 30 degrees, duplicate, mirror.
Resize element 61 to 40%, paste at the top, duplicate move over some.

Add any other elements you would like to add.

If you are going to animate, merge with a white background.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

Animation
Copy your merged tag to animation, make as many layers as the animation,
this one having 21 layers.
Click on the 1st frame of the animation, go to Edit, select all, then go to
Animation and click on mirror, then go back to edit, select all, copy, then
click on the 1st frame of your tag, edit, select all, paste into selected frame,
place where you like, I pasted the circle part on the spout of
the kettle, then click, test the animation.
If happy save.

That's it
Hope you enjoyed doing my tut.


PTU Autumn Harvest


This tut was written Sept 28th, 2017, for those with a basic knowledge of psp.
I am using the awesome artwork of  Lys Isange
The tube is called "Stephanie" exclusive at S&Co
She comes in 10 different colors and the hat is removal.
You need a license to use this art work. Please do not use without a license.
 You can get this tube exclusive at S&CO Store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU kit Harvest Memories by Lil Mz's Brainstorm exclusive at S&Co  HERE
RD Mask 148_4  HERE
Check out the rest of the blog HERE
Filters

Font of Choice, I used  KG Skinny Latte

Drop Shadow usually V2 H2 50 black
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 15, apply your mask, delete, merge group, duplicate,
merge down.

Paste element 119 on the mask layer and move to the right a little.

Resize tube to 40%, paste on the left.

Resize element 71 to 50%, paste at the bottom in front of the cart.
Paste element 123 at the bottom on the tube layer, adjust.
Resize element 116 to 40%, paste on the right above the pumpkins.
Resize element 94 to 60%, paste at the bottom above the pumpkin layer on
the left to cover the straight edge of the tube legs.

Paste element 47 behind the tube on the left.
Resize element 55 to 20%, paste on the cart cover to the side.
Resize element 64 to 90%, paste on the right on the mask, duplicate,
mirror, move down a bit and erase the part behind the cart.

Resize element 41 to 25%, paste at the bottom behind the cart.
Paste element 49 on the pumpkin layer at the bottom.
Resize element 33 to 40%, paste at the bottom by the apples.

Resize element 121 to 30%, paste on the pole of the cart.
Resize element 58 to 30%, mirror, paste behind the tube on the left.
Resize element 57 to 30%, paste on the right behind the cat.
Resize element 59 to 30%, paste on the right in front of the pumpkin.

Paste element 56 at the top above the canvas of the cart, duplicate,
move down and to the right a bit more, duplicate, mirror, adjust on the left.

Resize element 117 to 40%, paste on the left behind the pumpkin.
Resize element 93 to 50%, mirror, paste on the right at the bottom above the cart.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.


FTU Clusters Ornamental Bliss

*CT for BLT Creates*

Cluster Names -: Ornamental Bliss Clusters
Kit Designer Name -: BLT Creates
Kit name -: Ornamental Bliss

New kit by BLT Creates - Ornamental Bliss
Available in both Full and Tagger Size
You can find it at PFD:  HERE
It is also available exclusively for BLT Creates's fans for $1 ONLY -


Fanclub link:
https://www.facebook.com/groups/BLTDeZignZFanClub/

Unlimited specials are relaunching.

All Brandy's kits are available to the Fan members for $1.

Click on the Cluster to get full size, then right click and save.


Here are a couple of tags I made with them




Wednesday, September 27, 2017

CT Tags Justice Howard

~CT Tag for Mystical Scraps (Artists)
©Justice Howard
Tube:  Studz
You can find the tube  HERE
She is loving her studz and she has Attitude




PTU Midway Madness



This tut was written Sept 27th, 2017, for those with a basic knowledge of psp.
I am using the awesome artwork of Andy Cooper
The tube is called "Killer Clown"
You need a license to use this tube, please do not use without a license.
You can find this tube at S&CO store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU kit Midway Madness by All Dolled Up!  HERE or HERE
Your worst nightmares coming true.
Evil clowns, real life spook house, and ghosts and
rolled into this one kit.
With 140 elements and 20 papers the worst carnival of
all time is taking place right here.
Angie Tagged Me Mask 19 HERE
Check out the rest of the blog HERE
Filter
xero-Soft Mood

Font of Choice, I used Hello Giraffe

Drop Shadow usually V2 H2 50 black
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 17, apply your mask, delete, merge group.
I recolored the edges with a red when I finished.

Paste element 43 on the mask layer.
Click inside with your magic wand, expand 10, mirror
your close up, paste, invert, delete, change the blend mode to
Screen.
Apply the xero filter-Soft Mood.

Resize element 133 to 95%, paste at the top on the left, duplicate, mirror.

Resize your tube to 60%, paste on the right.

Resize element 138 to 25%, paste on the right at the bottom.
Resize element 137 to 75%, paste on the left at the bottom of the stage.

Resize element 134 to 35%, paste to the left on the stage.
Resize element 63 to 20%, paste on the pumpkin on the right.

Resize element 136 to 30%, paste on the right in front of the pumpkin.
Resize element 84 to 20%, paste on the mask layer behind the tube,
duplicate, mirror, move more behind the tube.

Resize element 53 to 20%, paste between the jack in the box and pumpkin.
Resize element 57 to 20%, paste by the clown with the balloon.
Resize element 64 to 40%, paste at the bottom in front of the popcorn.
Resize element 66 and 69 to 10%, paste at the bottom where you like.
Resize element 61 to 25%, paste at the lower right, duplicate, mirror.
Resize element 99 to 25%, paste on the curtain about mid way on both sides.

Resize element 18 to 40%, paste on the left below the beads.
Paste element 41 being on the top layer.

Add any other elements you would like to add.


Once happy with your tag, close off any background you might have used.
Crop your tag to be sure no stray shadows are on the edges,  merge visible.
Resize first, sharpen, add your copyright and name.

That's it
Hope you enjoyed doing my tut.


PTU Our Heros


This tut was written Sept 27th, 2017, for those with a basic knowledge of psp.
I am using the awesome artwork of Andy Cooper
The tube is called "Fire Fighter Latex"
You need a license to use this tube, please do not use without a license.
You can find this tube at S&CO store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU kit Heros by All Dolled Up!  HERE or HERE
We all need heroes. That's what this kit is all about.
A salute to firemen around the world.
With 130 elements and 15 papers this kit is surely a must have.
Vix Big Mask 018  HERE
Check out the rest of the blog  HERE
Filter
xero-Soft Mood

Font of Choice, I used Hot Sweat

Drop Shadow usually V2 H2 50 black
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 2, apply your mask, delete, merge group.

Paste element 130, click inside with your magic wand, expand by
15, paste paper 3, invert, delete, then mirror your close up, paste, delete, select none.
Apply xero filter-Soft Mood.

Resize your full tube to 60%, paste on the left.

Paste element 24 at the bottom, duplicate several times, move each one below
the first one and up more to make a good patch of lawn, moving some
out more on the sides.

Paste element 32 at the bottom in front of the first grass layer to hide the dirt part.
Resize element 107 to 30%, paste in front of the tube at the bottom.
Resize element 18 to 25%, paste at the bottom in front of the truck.
Resize element 93 to 35%, paste on the left below some of the grass layers,
so the end go below the grass.

Paste element 43 below the paper layer on the left, duplicate, mirror.
Paste element 8 on the mask layer to the left, duplicate, mirror, move below
the first one.

Resize element 35 to 85%, paste below that building and adjust.
Paste element 41 below all the other buildings and up more in the center.
Resize element 96 to 20%, paste on the grass layer where you like,
duplicate, move over just a bit.
Paste element 59 on the right between the buildings, duplicate, mirror.

Resize element 20 to 85%, paste on the frame layer on the right.
Resize element 42 to 25%, paste below the tube by the truck.
Resize element 13 to 35%, paste on the right below the truck layer.
Resize element 51 to 75%, paste on the right above the frame layer, adjust.
Resize element 28 to 75%, paste on the left above the grass layers.
Resize element 56 to 20%, mirror, paste on the left below the hose reel.
Paste element 121 on the tube leg on the left.
Resize element 103 to 30%, paste on the lower right below the yellow cones.
Resize element 49 to 20%, paste below the tube on the grass.
Resize element 89 to 85%, paste at the top on the frame below the ladder.

Add any other elements you would like to add.

Once happy with your tag, close off any background you might have used.
Crop your tag to be sure no stray shadows are on the edges,  merge visible.
Resize first, sharpen, add your copyright and name.

That's it
Hope you enjoyed doing my tut.


Tuesday, September 26, 2017

PTU Witch's Brew


This tut was written Sept. 26th, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of  Zlata_M
Tube is called "Halloween Candle"
You need a license to use this art work. Please do not use without a license.
 You can find this art at their store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU Witches Brew by Purple Dreams Scraps HERE
Check out her blog HERE
Angie Tagged Me Mask 19 HERE
Check out the rest of the blog HERE

Font of Choice, I used Cardinal

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*


Open a new image 800 x 800
Paste paper 12, apply your mask, delete, merge group, duplicate, merge down.

Paste element 75, resize to 70%, click inside with your magic wand,
expand by 5, paste paper 12, invert, delete, mirror your close up tube, paste delete,
select none.

Resize your tube to 75%, paste on the right on the frame.

Resize element 63 to 75%, paste on the right behind the tube.
Paste element 59 at the bottom, below the paper layer of the frame.
Resize element 60 to 90%, paste below the brick walkway at the bottom
edge, duplicate a couple of times, move up more.
Resize element 64 to 50%, paste on the right behind the tube, duplicate,
mirror.

Resize element 2 to 50%, paste at the upper right above the tree layer.
Resize element 39 to 30%, paste on the right at the bottom above the tube.
Resize element 32 to 30%, paste at the bottom where you like.
Resize element 42 and 68 to 15%, paste by the book.
Resize element 15 to 50%, paste below the grass layer on the right.
Resize element 3 to 70%, paste on the left at the bottom being on the top layer.

Paste element 62 on the left below the paper layer of the frame, duplicate, mirror.
Resize element 1 to 35%, paste at the upper left.
Resize element 49 to 20%, paste on the left on the tree limb, erase just a little
of the hanger.

Resize element 33 to 25%, paste at the bottom in front of the kettle.
Resize element 23 and 24 to 15%, paste at the bottom to the right of the kettle,
duplicate both, move to the left where you like.

Resize element 8 to 20%, paste on top of the standing book.
Resize element 26 to 20%, paste on the frame layer to the left.
Resize element 10 to 35%, paste below the witch.
Resize element 52 to 95%, paste on the mask layer, adjust.

Add any other elements that you would like.

Close off any background you may of had.
Crop your tag to be sure no stray shadows are on the edges, merge visible.
Resize first, add your copyright and name.

Hope you enjoyed doing my tut.


Monday, September 25, 2017

FTU Minty Parlour Clusters

*CT for BLT Creates*

Cluster Names -: Minty PArlor Clusters
Kit Designer Name -: BLT Creates
Kit name -: Minty Parlor

New kit by BLT Creates - Minty Parlor
Available in both Full and Tagger Size
You can find it at PFD:  HERE
It is also available exclusively for BLT Creates's fans for $1 ONLY -


Fanclub link:
https://www.facebook.com/groups/BLTDeZignZFanClub/

Unlimited specials are relaunching.

All Brandy's kits are available to the Fan members for $1.

Click on the Cluster to get full size, then right click and save.


Here are a couple of tags I made with them



Sunday, September 24, 2017

PTU Autumn Wonders


This tut was written Sept 24th, 2017, for those with a basic knowledge of psp.
I am using the awesome artwork of Alehandra Vanhek
The tube is called "Letitia"
You need a license to use this tube, please do not use without a license.
You can find this tube at PFD store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU kit Secret Woodland by All Dolled Up!  HERE or HERE
In the woods the animals play and get ready for winter.
This kit contains 130 elements and 15 papers and
will have you helping the animals get ready for their fall harvest.
WSL Mask 84  HERE

Filter
xero-Bad Dream

Font of Choice, I used Candy Shop Black

Drop Shadow usually V2 H2 50 black
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 2, apply your mask, delete, merge group.

Resize element 33 to 90%, paste, click inside with your magic wand,
expand by 5, paste paper 11, invert, delete, paste your close up, delete,
select none.
Apply xero filter-Bad Dream

Resize your tube to 40%, paste to the right on the frame.

Resize element 55 to 50%, paste below the tube on one side, duplicate, mirror.
Paste element 119 on the mask layer on the left, duplicate, mirror,
move both down so a little of the bottom leaves shows, duplicate again,
move up so the red is on the left, duplicate, mirror.
Go back and duplicate both the yellow leaves at the bottom, move below the
tree layers on both.
Resize element 9 to 25%, paste on the lower left below the leaves.
Resize element 6 to 25%, paste at the lower left above the leaves.
Paste element 125 on top of the other trees on the left, duplicate,
mirror, adjust.

Resize element 10 to 25%, paste at the bottom where you like.
Resize element 54 to 40%, paste on the left at the bottom in front of the tube.
Resize element 59 to 40%, paste on the right below the tube layer.
Resize element 86 to 30%, paste below the book on the right, duplicate, mirror.
Resize element 16 to 25%, mirror, free rotate to the right at 65 degrees, paste
on the left where you like.

Resize element 34 to 50%, paste on the right below the flower, duplicate,
mirror, move above the frame layer.
Resize element 63 to 80%, paste on the mask layer on one side, duplicate, mirror.
Resize element 65 to 50%, paste on the left on the frame layer at the bottom.

Add any other elements you would like to add.

Once happy with your tag, close off any background you might have used.
Crop your tag to be sure no stray shadows are on the edges,  merge visible.
Resize first, sharpen, add your copyright and name.

That's it
Hope you enjoyed doing my tut.


CT Tags Ishika Chowdhury

~CT Tag for Mystical Scraps (Artists)
©Ishika Chowdhury
Tube:  Teela
You can find the tube  HERE
She comes in 8 different colors for your tagging fun.

I matched her up with a kit by Irish Princess Designs called
Walk In The Park and Fall Fox
 at Mystical also  HERE and HERE





Saturday, September 23, 2017

FTU Clusters Country Breakfast

*CT for BLT Creates*

Cluster Names -: Country Breakfast Clusters
Kit Designer Name -: BLT Creates
Kit name -: Country Breakfast

New kit by BLT Creates - Country Breakfast
Available in both Full and Tagger Size
You can find it at PFD:  HERE
It is also available exclusively for BLT Creates's fans for $1 ONLY -


Fanclub link:
https://www.facebook.com/groups/BLTDeZignZFanClub/

Unlimited specials are relaunching.

All Brandy's kits are available to the Fan members for $1.

Click on the Cluster to get full size, then right click and save.


Here are a couple of tags made with them